|
Model SSLM - 1270 Laminators are
suitable for laminating paper to solid board,
paper or carton or to corrugated board, carton
to carton and other materials, edge to edge (flush).
The glue and the laminating unit are separated.
Therefore it is possible to stop both sheets,
register them sideways and forward them edge to
edge - an absolute requirement when laminating
paper or both sides of a substrate sheet.
The machines are distinguished
by solid construction, modular design, high laminating
accuracy, short set-up times, little maintenance,
operating comfort etc. A number of additional
units can be added for increased automation:
- carrier sheet feeders
- pressure belt
- printed sheet feeder
- nonstop pile stacker
- batch pile turner
A front edge
suction feeder - model SSLM - 1270 is capable
of feeding single and double face corrugated as
well as carton and solid board. In addition to
this front edge feeder further carrier sheet feeders
are available: corrugated suction feeder, suction
belt feeder, back edge feeder.
Working widths: SSLM 1270mm
Tolerances ± 0.5 mm
(0.02')
Output/max. speed: automatically
up to approx. 1,000 sheets/h
Handfeed Sheet Table.
Operators required
All handfed machines require 3 operators:
To feed carrier material
To feed cover material
To remove the finished product.
|
