|
DELAMINATION
Delamination is the common problem.
Sometimes, when higher grammege paper
is used, the heat may become insufficient. in such a
case , speed of the machine shouls be reduced or a higher
capacity heater must be installed.
| Causes |
Solutions |
| If the bottom portion
of the adaptor is away from the flute roll, the
fluted peper gets free from the flute roll prior
to reaching nip between flute roll and the pressure
rolls and this portion of the flute gets crushed. |
Reset the adaptors with
uniform contact with the flute roll. |
| When above problem persists
after resetting of adaptor, it indicates worn -
out adaptors. |
Replace the adaptors. |
|
